山東美國分析儀多少錢

氧氮?dú)浞治鰞x的優點

采用惰氣熔融技術，同時測定氧、氮和氫元素含量

新設計封閉氣路系統，優化氣路循環，使氧氮?dú)錅y(cè)量更準確

可采用更廉價的氬氣作為載氣

催化爐溫度可調，使氧的測量更加準確

氣路系統都采用電磁閥控制，新增分段式漏氣檢測

水冷樣品加樣端口，有效隔絕雜質氣體侵入

儀器配置和氧、氮、氫測量范圍可靈活選擇

新設計的高靈敏度紅外檢測池和熱導池，有極低的檢出限

分析時間短

脈沖爐功率高達8.5kw，溫度3000℃

顆粒狀樣品無需膠囊包裹，使用經濟實惠

化學試劑及管路隱藏在門后（可移除）

強大的分析軟件（支持?jǐn)?shù)據和應用報告導出、增加評論區及其他更多功能）。

單點和多點校正（線性回歸）

可采用自來水、冷卻循環水機或交換機冷卻

新設計的產品可用于各類生產控制和實驗室。

力可OHN736&836系列儀器采用惰性熔融法，提供各種無機材料、鋼鐵、有色金屬、硬質合金陶瓷材料中寬范圍的氧氮?dú)渫瑫r(shí)測定。ONH836儀器通過***采納客戶的反饋意見和創新設計，力可***儀器采用觸摸屏技術和在線軟件平臺，增強了儀器的可操作性，降低了分析成本，節省實驗室桌面空間。

用戶友好界面的Cornerstone? 軟件

力可**的Cornerstone碳硫分析軟件采用觸摸屏界面使用戶可完整的達到分析控制、方法設定、在線診斷、數據報告。Cornerstone碳硫分析軟件允許用戶在單一分析界面中完成日常的所有工作，快速而且簡單易用。力可創新的批次和重復樣品數據分組功能極大簡化了樣品結果輸出和結果標準偏差的自動計算。減少了繁瑣的額外數據處理。

湖南氧氮?dú)浞治鰞x力可創新的批次和重復樣品數據分組功能極大簡化了樣品結果輸出和結果標準偏差的自動計算。

company profile

Shanghai Uzong Industrial Co., Ltd. (hereinafter referred to as UZONGLAB®) is a high-tech company that provides integrated solutions for intelligent laboratories, mainly serving the Chinese market and countries along the “Belt and Road”. It has three business divisions and one The technology center, namely the instrument business department, consumables business department, project development department, and Zhongyu Lianhe Technology Center. In addition to the Shanghai headquarters, we have established branches in Beijing, Shenyang, Shijiazhuang, Taiyuan, Qingdao, Guangzhou, Chengdu and Urumqi. To provide customers with more professional, safer and more convenient products and services is our sole goal.

Procedure - Solid Samples

Instrument calibration/drift correction.

Place the calibration/drift standard in a *** Nickel Basket, and if applicable, place the sample into the appropriate autoloader position.

Press the Analyze button on the instrument screen. After a short delay, the loading head slide-block will open.

Note: samples using automation should be placed in the appropriate autoloader position before starting the

analysis sequence. Once the sequence has started, the automatic analysis will start and end automatically.

Oxygen, Nitrogen, and Hydrogen in Refractory Metals

Summary

One of the most critical chemical specifications of titanium alloys is the hydrogen content. Too high of a

hydrogen content can cause hydrides to precipitate, which can lead to embrittlement and subsequent

cracking when the alloy is stressed. Hydrogen pickup typically occurs during downstream processing steps

such as heat treating, pickling, and cleaning.

The LECO ONH836 is a simultaneous oxygen, nitrogen, and hydrogen determinator that utilizes an electrode furnace, inert carrier gas, and both infrared and thermal conductivity detection to meet the analytical needs of the refractory metal industry. 

This application note was written specifically for use with the LECO ONH836 series determinator.

可選具有壓力補償和溫度控制性能的標氣檢測氣路。山東美國分析儀多少錢

Procedure – Powder/Chip Samples

Determine the instrument blank.

Press the Analyze button on the instrument screen, the lower electrode will close and the analysis sequence will start and end automatically.

Repeat steps 2b through 2g a minimum of three times.

Set the blank following the procedure outlined in the operator's instruction manual.

Instrument calibration/drift correction.

Login a minimum of three Standard reps.

Weigh approximately *** grams of a calibration/drift standard into a *** Nickel Capsule; enter the mass and standard identification into appropriate rep fields. If applicable, place the nickel capsule in the appropriate autoloader position.

山東美國分析儀多少錢